Sell TM070JDHG30, #Tianma #TM070JDHG30 Stock, TM070JDHG30 Tianma 7 inch LCM 1280×800 400 800:1 88/88/88/88 16.7M WLED LVDS , #LCD_Display, #LCD, #TM070JDHG30
Email: sales@shunlongwei.com
URL:
https://www.slw-ele.com/tm070jdhg30.html
-
- Diagonal Size: 7.0 inches
- This is the size of the display panel measured diagonally.
- Panel Type: a-Si TFT-LCD, LCM
- The display panel is of the a-Si (amorphous silicon) Thin-Film Transistor Liquid Crystal Display (TFT-LCD) type.
- Resolution: 1280(RGB)×800, WXGA
- The panel has a resolution of 1280 pixels in the horizontal (RGB) direction and 800 pixels in the vertical direction, making it a WXGA display.
- Pixel Format: RGB Vertical Stripe
- The arrangement of the pixels on the panel is in an RGB vertical stripe format.
- Active Area: 149.76(W)×93.6(H) mm
- This is the dimension of the screen's active area where images are displayed.
- Bezel Opening: 152.76(W)×96.6(H) mm
- The bezel opening represents the area of the frame around the active display area.
- Outline Size: 161(W)×107(H) mm
- These are the physical dimensions of the entire display panel.
- Surface: Hard coating (3H)
- The display panel has a hard coating with a hardness rating of 3H, which provides some protection against scratches.
- Brightness: 400 cd/m² (Typ.)
- The typical brightness of the display is 400 nits (candelas per square meter).
- Contrast Ratio: 800:1 (Typ.)
- The typical contrast ratio of the display is 800:1.
- Viewing Angle: 88/88/88/88 (Typ.)(CR≥10) Left / Right / Up / Down
- The typical viewing angles for the display are 88 degrees in all directions (left, right, up, and down) with a contrast ratio of at least 10.
- Display Mode: SFT, Normally Black, Transmissive
- The display panel uses a Super Fine TFT (SFT) technology, is normally black in its unpowered state, and is transmissive.
- Best View On: Symmetry
- The optimal viewing angle for the display is at a symmetric angle.
- Response Time: 35 (Typ.)(Tr+Td)
- The response time of the display is approximately 35 milliseconds, measured as the sum of the rise time (Tr) and fall time (Td).
- Display Colors: 16.7M (50% NTSC)
- The display supports 16.7 million colors and covers approximately 50% of the NTSC color gamut.
- Lamp Type: 3S7P WLED, 30K hours, Without Driver
- The panel uses 3 series 7 parallel White Light Emitting Diodes (WLEDs) as the light source, with a rated lifetime of 30,000 hours. It does not require an external LED driver.
- Frequency: 60Hz
- The panel has a standard frame rate of 60Hz.
- Touch Screen: Without
- The display does not include a touch screen.
- Panel Weight: 120g (Typ.)
- The weight of the display panel is approximately 120 grams.
- Application: Industrial, Medical Imaging, VOIP Phone
- The display panel is suitable for industrial, medical imaging, and Voice over Internet Protocol (VOIP) phone applications.
- Signal Interface: LVDS (1 ch, 8-bit), 40 pins FPC
- The display panel uses a Low-Voltage Differential Signaling (LVDS) interface with 1 channel and 8-bit data, and it connects via a 40-pin Flexible Printed Circuit (FPC) connector.
- Input Voltage: 3.3/10.4/16/-6.8V (Typ.)(VDD/AVDD/VGH/VGL)
- The typical input voltage requirements for various power supplies are provided.
- Environment:
- Operating Temperature: -20 ~ 70 °C
- Storage Temperature: -30 ~ 80 °C
- The recommended operating temperature range for the display is from -20°C to 70°C, and the storage temperature range is from -30°C to 80°C.
